From Daniel Paul: “Pulled my DHMC down from the rafters to start looking at refurbishing it this winter. I seem to have the original seals on. The funny shaped seal that goes around the door lips and along the back is interesting. From the engineering photos on your website I thought the rubber groove would clip on. Instead they’re held on the other lip by a fabric coated door seal with internal metal clips. Small brackets hold this at the rear end. The front seal to the screen is a simple packing seal. I haven’t yet removed the rear windscreen seal but looks like a simple ‘H’ type glass seal. I’ve had good luck with Phoenix Trim before. Once I have it all apart this winter I will investigate further to see if can find direct replacements. The cross sections on the engineering diagrams look correct though. Best wishes Dan”.
